Skip to content
Hairover.app

Free tool · No. 12Choosing a cut

Clipper Guard Converter

What is a number 2 haircut in mm?

Convert any standard clipper guard number to millimeters and inches, or enter a length and find the closest guard. The full chart is below, ready to screenshot or print for your next visit.

Instrument No. 12Private, nothing stored

Guard number

A #2 guard leaves

6 mm · 1/4 in

Classic buzz, covers most scalp.

Sizes vary a little by clipper brand. Check the length printed on the guard, or ask your barber which clippers they use.

How to use this tool

  1. Pick a direction

    Convert a guard number to a length, or a length you want to the closest guard.

  2. Choose a guard or enter a length

    Guards #0 to #8 are covered, in millimeters and inches.

  3. Take it to the chair

    Screenshot the result, or print the full chart below.

Clipper guard sizes chart

Clipper guards are numbered by how much hair they leave. On most clippers, each full number adds about 1/8 inch (3 mm). Half sizes such as #0.5 and #1.5 are used to blend fades.

GuardMillimetersInchesWhat it looks like
#0under 1.5 mmunder 1/16Almost bare, with scalp fully visible
#0.51.5 mm1/16Stubble length, used for fades
#13 mm1/8Very short, with visible scalp
#1.54.5 mm3/16Short fade step, mostly a blending length
#26 mm1/4Classic buzz, covers most scalp
#310 mm3/8Soft buzz, a common side length
#413 mm1/2Long buzz, with some texture starting
#516 mm5/8Short crop, with visible texture
#619 mm3/4Short, full cut
#722 mm7/8Medium-short, sits close to the head
#825 mm1Longest standard guard, can be combed

What is a number 1, 2, 3 or 4 haircut?

  • Number 1: 1/8 inch (3 mm). Very short, with the scalp clearly visible. Common for the lower part of a fade.
  • Number 2: 1/4 inch (6 mm). The classic buzz cut. Covers most of the scalp.
  • Number 3: 3/8 inch (10 mm). A softer buzz, and a very common length for the sides of a short cut.
  • Number 4: 1/2 inch (13 mm). A long buzz where texture starts to show.

Anything longer than a #8 (1 inch, 25 mm) is usually cut with scissors over a comb. For more on each length and how it grows out, see haircut numbers and guard sizes.

Guards for fades

A fade blends from a very short length at the bottom to a longer one where it meets the top. A typical skin fade might start with no guard or a #0, then step through #0.5, #1 and #1.5 to a #2 or #3. A taper uses the same idea but only around the neckline and ears. The higher the fade and the shorter the starting guard, the more scalp shows. Our guides to low, mid and high fades andthe taper fade explain the options.

Are all clipper guards the same?

Mostly, but not exactly. Brands round differently, some label guards in millimeters, and some sell intermediate sizes. If you are cutting at home, check the length printed on each guard. If you are going to a barber, the number plus a photo is usually all they need. The barber card maker puts your guard, top length and neckline on one card, and what to tell your barber explains the rest.

Frequently asked questions

What is a number 2 haircut?

A number 2 guard leaves about 1/4 inch (6 mm) of hair. It is a classic buzz length that covers most of the scalp.

How many mm is each clipper guard?

On most clippers, each full number adds about 1/8 inch (3 mm): #1 is 3 mm, #2 is 6 mm, #3 is 10 mm, #4 is 13 mm, up to #8 at 25 mm. Half sizes such as #0.5 and #1.5 sit between.

Are guard sizes the same on every brand?

Mostly, but not exactly. Brands round differently, and some guards are labeled in millimeters instead of numbers. Check the length printed on the guard, or ask your barber which brand they use.

What guard is used for a fade?

Fades blend from very short guards (#0 to #1) at the bottom to longer ones (#2 to #4) where they meet the top. The exact guards depend on how high and how dark you want the fade.

Can I print the chart?

Yes. Use the print button under the chart, or take a screenshot to show your barber.

Expand a question to read the answer.