fade · how to
How to Fade Your Own Hairat Home
How to fade your own hair at home, step by step: the guards you need, how to blend between them, tips for the back of your head, and mistakes to avoid on your first try.
Hairover Team

To fade your own hair, start long and work shorter. Cut the whole side with your longest guard, then take each shorter guard a little lower, flicking the clipper outward at the top of each section to blend. Use the lever and half guards to smooth the lines. For a first try, choose a low fade or taper with longer guards, and use two mirrors for the back.
What you need
- Clippers with a full set of guards, ideally including half sizes.
- A trimmer for the neckline and around the ears.
- Two mirrors, or a three-way mirror.
- Good light.
Check what each guard leaves with the clipper guard chart.
Step by step
- Start with clean, dry hair.
- Cut the sides and back with your longest guard for the sides, for example a number 3.
- Set the fade line with the next guard down, for example a number 2, cutting up to just below where you want the fade to start.
- Go shorter and lower, with a number 1 below that line.
- Blend each line: flick the clipper outward as you reach the top of each section, and use the lever half-open between guards.
- Clean the neckline and ears with a trimmer.
- Check symmetry from the front and both sides.
The back of your head
Stand with your back to a wall mirror and hold a handheld mirror in front of you. Move slowly, and use longer guards at the back than you think you need. If it’s hard, ask someone to help with the back.
Choosing the fade
- Low fade or taper: the most forgiving for beginners. See low fade and low taper.
- Mid fade: once you’re comfortable. See mid fade.
- Skin fade: leave until you’ve practiced. See skin fade vs. taper fade.
Common mistakes
- Starting with a short guard, which leaves no room to fix mistakes.
- Cutting the fade line too high.
- Pressing the clipper flat instead of flicking out to blend.
- Rushing the back.
When to see a barber
If you want a sharp skin fade or complex design, a barber’s eye from behind makes a big difference. Many people cut the top at home and see a barber for the fade. See how to cut your own hair and how to find a good barber.
Want a quick answer for your own hair? Try the free Clipper Guard Converter. It takes about a minute, and nothing is stored.
Try it on first
Upload a clear photo to Hairover, get a hair analysis, and try hairstyles on your own face before you commit.
FAQ
What guards do I need to fade my own hair?
A full set, ideally with half sizes such as 0.5 and 1.5, which make blending much easier.
How do I cut the back of my own head?
Use a handheld mirror with a wall mirror, or a three-way mirror, and go slowly with longer guards first.
Should my first home fade be a skin fade?
No. Start with a low fade or taper using longer guards, which is far more forgiving.